No Hot Water? Common Causes & Tips to Deal with Yourself
No Hot Water? Common Causes & Tips to Deal with Yourself
Blog Article
Were you on the lookout for info around What Would Cause My Electric Water Heater to Stop Working??
Many contemporary residences take advantage of an electric water heater for their heating unit, because of its ease and ease of use. However, much like any other electric devices, problems may occur with its usage, suddenly. It can be actually irritating to wake up to a cold shower rather than a hot one or having your bathroom with water that isn't warm adequate or perhaps too hot. Whatever the situation may be, hot water heater troubles can be fairly aggravating. Fortunately, we've made a list of possible services to your hot water heater problems. There are a variety of variables that can create most of these troubles, it could be an issue with the power supply, the electrical heating element, or the thermostat. Before doing anything, ensure you turn off the main power supply for safety. Whatever the problem is, getting it fixed should not pose too much of an issue if you follow these steps:
Check Your Power Supply:
As basic as this might appear, it is really essential. Without ample power, your hot water heater will certainly not operate. So the first thing to do when your water unexpectedly retires is to verify that it isn't a power problem. Check if the fuse is burnt out or the breaker tripped. If the circuit breaker is the concern, merely transform it on and off once again. Replace any busted or damaged fuse. Check the home appliance with power after these modifications to see if it's now working.
Examine the Burner in the Hot Water Heater:
If it's not a power problem, then attempt looking into your burner if it is still working. Test each of your burner to ensure the issue isn't with any of them. If any of them is damaged, change that part and then examine whether the warm water is back on.
Inspect Your Thermostat:
If your hot water heater still isn't working or the water coming out isn't warm sufficient, you may require to check the temperature setups on your upper thermostat. Ensure the breaker is switched off before doing anything. Open up the gain access to panel and press the red switch for temperature level reset above the thermostat. This need to assist heat the water. Transform the breaker back on and examine if the issue has been solved.
Call A Professional:
If after changing all malfunctioning parts and also resetting your temperature, the hot water heater still isn't functioning, you may require to get in touch with a specialist plumber for an expert opinion. The issue with your heating system could be that the hot and cold taps have actually been switched or it might be undersized for the amount of warm water required in your home. Whatever the case might be, an expert plumber would aid resolve the problem.
Verdict
Hot water heater issues are not always significant. A number of them result from small issues like a blown fuse or damaged heating element. Changing the defective parts must do the trick. Nonetheless, if you are still not able to resolve the trouble, give a call to your closest plumber ahead to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
We hope you enjoyed our piece on No Hot Water — Water Heater Repair. Thanks so much for finding the time to read through our blog. Enjoyed our write-up? Please share it. Help other people find it. Many thanks for your time. Don't forget to come visit our blog back soon.
Schedule An Appointment
Report this page